Sandblastkit Facemask
Sandblastkit Facemask
Sandblastkit Facemask
Full-Face Sandblasting Respirator
One Mask.
Total Coverage.
Built for shop work and field use, this mask delivers complete head-on protection for both beginners and professionals. Simple to put on, easy to adjust, and designed to stay secure throughout the job.
Everything
You Need
Filtration and Visibility
Clean. See Clearly.
Built for Portable Sandblasting
Protection That Moves With You
Everyday Versatility
From Rust Removal to Full Restoration
Complete the Kit
People who
bought this
also grabbed
Add any of these to your order
SandblastKit Pro Full-Body Blasting Suit
SandblastKit™ ImpactGrip Protective Gloves
SandblastKit Pressure Booster Gun
Rust Inhibitor – 1 Gallon
Stop Flash Rust Before It Starts The fastest way to protect freshly blasted or cleaned metal before painting or coating. Rust Inhibitor is designed to protect bare metal immediately after blasting, grinding, or cleaning. It forms a protective barrier that prevents flash rust and corrosion, keeping your surface clean, stable, and ready for the next step. Because once metal is exposed — rust starts fast. This gives you a controlled window to finish the job properly. ⸻ Why Flash Rust Happens After blasting or cleaning, metal is fully exposed. That means: • moisture in the air reacts instantly • oxidation begins within minutes • surfaces can turn orange before you’re ready Without protection: • you lose your prep work • coatings may fail • you’re forced to redo the job Rust Inhibitor stops that process before it starts. ⸻ One Step Protection That Buys You Time Instead of rushing to paint immediately, Rust Inhibitor lets you: ✔ protect the surface instantly ✔ prevent flash rust formation ✔ maintain clean metal condition ✔ move to finishing on your timeline It keeps your work stable, clean, and ready. ⸻ What Rust Inhibitor Actually Does 1. Seals the Surface Forms a protective layer over freshly exposed metal. 2. Stops Flash Rust Blocks moisture from reacting with bare steel. 3. Preserves Your Prep Keeps surfaces ready for primer or paint without rework. The result is less stress, fewer failures, and better final finishes. ⸻ Built for Real Metal Work Rust Inhibitor is made for real-world jobs where timing matters. Perfect for: • Automotive restoration • Frame and chassis work • Trailer and equipment repair • Fabrication projects • Marine environments • Industrial surface prep Any situation where metal is exposed before coating. ⸻ Why This Step Is Critical Most people focus on blasting… But the real mistake happens after. They leave metal exposed too long — and rust starts again. Rust Inhibitor closes that gap. ⸻ Fits Perfectly Into the SandblastKit Workflow Blasting removes the rust. Protection locks in the result. Workflow: 1. Blast rust and coatings 2. Rinse and dry 3. Apply Rust Inhibitor 4. Prime or paint when ready This keeps your surface clean and protected between steps. ⸻ Key Benefits ✔ Prevents flash rust on freshly blasted or cleaned metal ✔ Protects steel and iron from corrosion ✔ Ideal after sandblasting or surface prep ✔ Maintains surface quality before painting ✔ Easy-to-apply liquid formula ⸻ Perfect For • Automotive restoration • Frame and chassis protection • Metal fabrication projects • Marine equipment maintenance • Industrial prep work Anyone who wants to protect their work before finishing. ⸻ Don’t Lose Your Prep Work You just removed the rust. Don’t let it come back before you finish. Rust Inhibitor keeps your surface clean, protected, and ready — so your final coating performs the way it should.
Car Chassis Cleaning Pressure Washer
Quickly and easily clean your undercarriage without crawling! What is the Car Chassis Cleaning Pressure Washer? A premium attachment for pressure washers, designed not only to clean the undercarriage and chassis of cars, trucks, SUVs, and off-road vehicles, but also to double as a surface cleaner when flipped over. Equipped with 4 high-pressure sprayers, a wide 65° fan nozzle, and universal quick-connect coupling, it delivers pro-grade cleaning power. Whether blasting away winter salt, off-road mud, or driveway grime, this 2-in-1 tool makes the job faster and easier. Why You'll Love it 2-in-1 versatility - Use it upright for underbody cleaning, flip it for surface cleaning—driveways, garage floors, patios. Deeper, more consistent cleaning - Gets the underbody where regular washers can’t reach—less rust, less salt buildup. Time & labor saved - No more crawling under vehicles or switching tools for ground surfaces. Damage prevention - Salt, mud, grime cause corrosion—this helps protect your vehicle investment. Durable design - Stainless steel + aluminum build for long-lasting performance. PERFECT FOR Drive in areas with snow, salt, or coastal roads that accelerate corrosion. Regularly take your vehicle off-road, through mud, trails, or water. Want a dual-purpose cleaner for both undercarriage and ground surfaces. Own trucks, SUVs, Jeeps, or lifted vehicles. Care about saving time while keeping both your vehicle and property clean. How To Use Attach the CleanerConnect the 1/4” quick-connect fitting to your pressure washer wand or extension pole. Choose Mode Upright: Clean undercarriage & chassis. Flipped Over: Use as a surface cleaner for driveways, patios, or garage floors. Select the Right PSIMinimum 1,500 PSI, optimal results at 2,500–4,000 PSI. Spray & CleanKeep the unit moving evenly—front to back for vehicles, side to side for surfaces. Maintenance TipsFlush with clean water after detergent use, check for nozzle clogs, and consider an inline water filter for longer life.
Join the community
An international community of users share their ideas and journeys with each other online, anywhere.
Works great !! Before and after.. 3100psi pressure washer and Black Diamond media from Tractor Supply
I am definitely happy with the results from blasting my 78' Ford frame.
Bought one 8 months ago and finally tested it on a oil pan with a bag of play sand from home depot I set the sand bucket 3’ above the work peace and it sucked up sand like it was in a hotdog eating contest. I then warmed the pan with propane to remove any moisture and primed it all in one step. Very pleased It worked well.
I completely retract my previous statement that this company is fake. Not only is this product as real as it gets. When I had doubts about a shipping mistake that happened. A real person reached out to answer my concerns and ultimately fixed any issues. They were genuine in their apology and very humble in their approach.
This might save me thousands of dollars in my classic car restoration. Honestly I'll give this a shot.
Heres a real review. I have the 3000psi kit and the 5000psi kit I bought a metal trashcan. I placed a window screen mesh on top to screen the rock from the play sand. ****VERY IMPORTANT STEP**** this prevents frustration with clogged tips. Keep the sand feed hose feeding on top while blasting. Prevents water from getting in the line when you stop spraying. Does it work 100% After you spray it will leave a gold oxidation. To remove this before prepwork you will need to use Ospho or Chemprime. A phosphoric acid which will help etch the metal for the Direct to metal (DTM) primer to positively bond. I love this thing. Yall should send me a new kit as my nozzles just about had it... i pur it through the test with my 1972 Cutlass
I have one you better be careful all your friends will want to borrow or bring stuff to you .....it mad a believer out of me I did a rim off a 1964 f350 never cleaned. 7 minutes it was down to metal
Works great! Used sifted play sand and it stripped the paint and rust right off!
I just finished a 1969 Chevelle door jams doors so forth. Messy but effective.....start the body this week. I changed the sand feed line to a larger size because it kept stopping up with wet sans close to the nosel. Small pebbles were and issue as well. Use as fine sand as you can find. Still had to sift it .The larger sand feed line made a world of difference.
I have used a couple different variants of this. It takes a decent size pressure washer and water supply to run. Also goes through media pretty quickly. That being said it generally leaves a decent finish, also you will need to make sure you have a plan to prevent flash rust after you’re finished.
I first learned about this, from watching YouTube videos about pressure washing with a sandblast attachment, and I spent less than $300 for the pressure washer and this sandblast attachment, bought a 40lb bag of media for less than $10, and a tarp to collect & reuse the media. I blasted my own 1970 GM A-body frame on a pair of plastic sawhorses, on a car trailer, in my back yard, and there was no (harmful) dust to breathe, and no mess or cleanup to worry about. My frame came out like new, I primered & painted it with rattle cans, as a driver vehicle! Best tool I’ve ever owned!
Works really good used it today was surprise how it came out
I purchased one and it works excellent without wasting sand. Although I wished I'd ordered a wet suit with it.
These work great. Only thing I recommend is to filter the cheap sand through a screen to rid it of chunks that plug the suction tube.
This WORKS!!!! I ordered mine and i was amazed at how well it worked without the dust storm and use of a large air compressor.
I feed sand to this unit using a small pressure feed pot. Works much more efficient as the sand is forced into the hose with air pressure. The suction hose does not plug up! Still dustless blasting!!! Great combination for me!
Frequently Asked Questions
Everything you need to know about SandBlastKit. Can't find your answer? Contact us directly.
What does SandBlastKit actually do, is it a real water sandblaster or just an attachment?
SandBlastKit converts your existing pressure washer into a wet sandblaster. It attaches directly to your wand and uses suction to draw sand from a bucket, mixing it into the water stream so you can blast away rust, paint, and heavy coatings from metal, wood, and concrete. Most standard pressure washers (1,500–4,000 PSI) are compatible.
No special equipment required
Which bundle do I need for my project?
It depends on the job. The Starter Kit is perfect for small projects and first-time users. The Do It Right Bundle (our most popular) adds PRO Nozzles, a Face Mask, Sand Sifter, and Rust Inhibitor — covering everything for a complete job. For heavy-duty work like full truck frames, trailers, or farm equipment, the Pro Bundle includes a high-pressure gun and cleanup accessories built for repeated, large-scale use. Not sure? Contact us and we'll point you in the right direction.
How do I set up my DIY pressure washer sandblaster correctly to avoid clogging?
Setup order matters: always pull the trigger and get water flowing before placing the suction head into the sand, and when stopping, lift the suction head out first, then release the trigger. Keep the sand hose as upright as possible (around the 12 o'clock position) and raise your sand bucket about 3 feet off the ground for better suction. Using dry, filtered sand is essential, even one damp clump can block the system. This is the single most overlooked step in any pressure washer sandblaster DIY setup.
What type of sand or blasting media should I use?
Use dry, coarse-grade blasting sand — avoid play sand or beach sand as they are too fine, too smooth, or too damp and will clog the system. Different jobs call for different media: coarser grits remove heavy rust and thick coatings, while finer grits are better for lighter prep work or softer surfaces like wood. Always run your sand through the Sand Filter/Sifter before each session to remove rocks, moisture, and debris.
How do I prevent rust from coming back right after blasting?
After blasting, bare metal oxidises fast — sometimes within hours. The fix is simple: add Rust Inhibitor to your water feed line (1 oz per gallon). This protects the surface for up to 72 hours, giving you plenty of time to apply primer or paint. If you're not coating right away, wipe the surface dry, blow air into all seams and joints, and store in a dry environment. The Mini Cordless Turbo Jet Blower is great for clearing moisture from tight spots like bolts and frames.
Can I reuse my blasting sand to save money?
Yes — with the right setup you can recover and reuse 70–80% of your sand. Place the Sandblast Catch Net under your work area to collect spent media. After blasting, rake it out, let it dry in the sun, then run it through the Sand Filter/Sifter again before the next session. Store reclaimed sand in a sealed metal container away from moisture to keep it dry and ready to use.
My blasting feels weak or the sand keeps clogging, what should I do?
The two most common causes are wet sand and incorrect hose angle. Check that your sand is completely dry (sift it first), keep the suction hose upright, and make sure the bucket is raised off the ground. If suction is still poor, adjust the black knob on your washer's pump to regulate flow. For stubborn rust or thicker coatings, upgrading to the High-Pressure Washer Gun significantly boosts PSI and gives you interchangeable tips for more targeted control.
What 100+ real buyers told us
We analyzed every Facebook review so you know exactly what to expect -- and what questions to ask before you buy.
The friction is technical clarity -- not trust.
60-70% of comments show real buying intent. They just need one clear answer before they pull the trigger.