Everything you need to get started, fast.
Built by makers, backed by a real guarantee.
From light surface prep to heavy rust stripping, these kits give you the pressure, the nozzles, and the control to strip bare metal fast. No guesswork. Just pick your power level and start blasting.
Your results depend on what you're shooting. Coarse media cuts through heavy rust aggressively. Fine media gives you control on delicate surfaces. Get the right grit and your work shows it.
Sand gets everywhere, boxed rails, tight seams, fins, frames. These tools are built to flush it all out fast so you're not chasing grit for hours after the job is done.
Bare metal flashes rust within hours. Don't let the work you just did go to waste. Inhibit, convert, and seal on the same day, before oxidation gets a foothold again.
Bare metal needs protection before rust gets a second chance. Prime it right, coat it strong, and seal the surface for good. This is the step that makes your work last.
Turn Your Pressure Washer Into a Professional Wet Sandblasting System
Upgrade your pressure washer into a powerful restoration tool with our NEW Sandblasting Kit. Remove rust, paint, varnish, and corrosion from any surface effortlessly using the combined power of your pressure washer and the right blasting medium.
Upgrade your pressure washer into a powerful restoration tool with our NEW Sandblasting Kit! Our kit is made with top-of-the-line materials, including a brass nozzle and steel pick, a transparent steel wire hose, and maximum pressure of 5000 PSI.
Remove rust, paint, varnish, and corrosion from any surface effortlessly using the combined power of your pressure washer and your preferred sand medium.
1. Removing Rust:
2. Stripping Paint:
3. Cleaning Dirt, Grime, and Mold:
4. Varnish Removal:
1/4 slip connect adapter, 10’ hose, 16’’ pressure washer wand, 10’’ sand wand, the pressure washer wand, and sand wand are input while the nozzle is output.
The Sandblasting Kit has a wide variety of connectors to choose from to fit your pressure washer:
CLICK HERE FOR CONNECTOR 👉 CONNECTOR
This sandblaster Is durably built to last a VERY LONG TIME: so long as you change the nozzles as they wear out with use depending on PSI.
CLICK HERE FOR NOZZLES 👉 NOZZLES (60%OFF)
Use coarse media like Black Diamond or Glass Beads for paint and rust. Use softer ones like Soda or Walnut Shell for wood and delicate surfaces. Choosing the right one makes all the difference
Once you’re done blasting, dry the surface fast and spray rust inhibitor. That keeps flash rust from forming so your project stays clean and ready for paint or primer.
This kit is used by pros, DIYers, and restorers around the world. Whether you’re working on your car, fence, patio, or project—you’re getting clean resuts
Overall rating: 4.5 / 5 from 80 reviews.
I ended up screening to remove anything larger than a sand grain and it began to feed very well.... I had sun dried to sand on a tarp, I had to really make sure the sand was dry, dry, dry....... When it was feeding it removed paint and rust from my old Jeep frame, I'm going to try soda next and see if that is any better.
Didn't think this product was going to be any more than a gimmick honestly. Was pleasantly surprised how effective it was it quickly stripping off decades of rust from an antique drill press I picked up to restore. I used inexpensive black diamond sandblast media from tractor supply that cost somewhere around $12 for a 50 lb bag. This media was a little bit too course for the nozzle size so I didn't get consistent flow but it was a good enough to take care of this job in about 15 minutes. Next time I use it I will try quikrete mortar sand from home Depot which is also cheap but it has a slightly smaller grain size. Totally worth purchasing as long as you have an area you don't mind getting covered with whatever you're using as an abrasive. The system does make quite a mess but so would air driven sound blasters.
I was skeptical when making this purchase but shipping was much faster than I expected and the quality of the sandblaster was much higher than I expected. I media blasted a car door and the blaster worked great. I am really happy with this purchase.
Wow, just wow. I decided to use this product to speed up my refinishing of a Jon Boat. It turned a 3-day project into a 1 hour project. I will be using this product for every sandblasting project from now on. All you need is some play sand from the hardware store and I sandblasted a 14 ft Jon Boat with 150 lb of sand.
This system works excellent very happy with it
USed this to strip an old boat trailer of paint and rust. Worked better than I had hoped. Not a sgood as a true sand blaster but I dont have one of those but did have a pressure washer. Kit has all the doohickys and geegaws you need to make it work, just supply your own pressure washer gas water and sand.
This sandblaster works VERY well, going to save lots of time while restoring my pickup! Thank you!
This kit is awesome. Stripped this drill rod box with 2 bags of black beauty medium grit and a 4400 psi 4.8 gpm Harbor freight gas powered power washer. Tried play sand and a 2200 psi electric 1.8 gpm and didn’t work well. Very happy and impressed. Took me no more than 1/2 hr to strip that whole front
Just received it a few days ago, opened it all up and everything was there, no damage. I haven’t used it yet.
Used it for the first time today. I was skeptical at first, but it did much better than I anticipated. I will consider upgrading to the pro kit in the future. I have already recommended it to others as they were interested in how it would preform.
Have some trailer wheels that need to be repainted. Finally got a chance to use the sandblast kit with some green diamond media. Was happy with the results.
Pro Sandblast Kit™ Ceramic Series 60% OFF Limited Time Offer
Haven’t used it yet
What used to take me hours of tiredness blasting takes me half the time allowing me to to spend more time on powder coating cutting my turnaround time almost in half
Very complete kit! Looks like good quality
I have a 1964 gmc that I plan to restore this summer! I haven’t used your sandblast kit yet, but look forward to seeing what it will do!
My 1996 Rayco stump grinder is in need of a new coat of paint. I had been using my angle grinder to strip old paint and rust but that was slow going and it's hard to get into cracks and crevices. I bought this kit thinking it was worth a try but I was not very optimistic. Today I put the parts together which took maybe three minutes, stuck the tube that sucks up the sand in a bag of black sand from Menards for $12, and fired up the pressure washer. My pressure washer is a Honda, 3000 psi. It took at most five minutes to blast down to the bare metal on the section you see in the pic. The other pic is the other side that I had already been grinding on, to show you what I took off with the sand/pressure washer. I did this section and another one a bit bigger and it used up my 40 pound bag of sand. I plan on trying some mason's sand which is only $4 a bag to see if that will work as good. I am a do-it-yourself guy and I endorse this kit 100%.
It'll work great if you follow these tips . First put the suction tube in empty bucket then pour your sand in. Secondly position the bucket so it's touching the pressure washer. The vibration from the pressure washer will agitate the sand so it's always moving around the suction tube. Third I found that a shorter hose from suction tube to wand works better. Fourth if your using a coarser sand like pool filter sand or bigger abrasive then play sand you'll want to have a gravity fed system and you'll want to use a 3/4 in hose. I used a 2300psi 2.4 gpm washer and it will use the sand up quick but you'll get that sand blast look.
Excellent product, great packaging, if you are anything other than a rock the instructions aren’t needed. Works well with play sand, $3 a bag where I’m at, just make sure you sift it to get out the big rocks. Worked wonders to wet blast all suspension components of an old Subaru, even the painted ones. 10/10 would buy again. Works on both my cheap $100 electric pressure washer as well as my large high pressure gas one as well. Faster results with the gas one same results with the electric one. Only complaint is NOT with the product, it’s with trying to find enough dry sand to feed the thing.
Good buy! Some basic tips to get it to work, and it works pretty well. 1. Make sure the sand is very dry, I spread mine out on a tarp in the hot sun and let its dry to make sure that it flows properly. 2. Recommend that you screen the sand to remove any Pebbles or larger rocks. You will find that if these rocks or Pebbles get clogged in the nozzle water can backflow into the sand feed tube at which point you will have to disconnect clean out and dry. 3. I found lasting in a circular pattern seem to provide the best results. When using the Blaster it is essential that you have sand that flows easily much like that in an hourglass. I use a fine place and that I purchased at Home Depot, and dried and screened as above. I was able to successfully sandblast a concrete sidewalk and Patio we're moving all the stain.
For a cheap price, I wasn't expecting much. But after $20 worth of sand and a few bucks of fuel in the pressure washer, I was pleasantly surprised! I am powder coating some aluminum rims, and needed to prepare the surface. This thing works amazingly well for being so simple and cheap. Not only did it give a great surface profile for powder coat, but it's relatively quick and easy. My pick was Quickrete all purpose sand. The first bag went ok, only one rock jam up. The second bag, not so well. Luckily I ordered stainless steel mesh together. Filtering the sand halfway through the bag. I was amazed at the number of rocks in it! One other thing I learned is that when a rock jams into the tip, you will then have backflowing water going toward your sand. Next up is covering your sand bucket. You do not want any overspray getting in there. I followed another reviewer's suggestion and had my sand bucket on my truck tailgate, and wheels on the driveway. this will help your sand to gravity feed. Buy good media or screen your sand first. Get your cars far away too, or anything else that doesn't agree with sand for that matter. And plan on stripping down as far as you can and hosing down outside afterward.
Great tools
Works really well and I am really happy with the results
I use this with a 3,300psi pressure washer with a long wand. I use it for removing paint and rust off metal fencing, vehicles, tools, and various farm implements. It works great, one thing to note is to point the sand hose upwards on the wand end so that the water cannot drip back down into the sand hose. I recently sprayed an entire spiral staircase in less than 4 hours saving days of work with a grinder, my back, and the finish left is much more uniform than I would have gotten with a grinder. For vehicles, you can use outdoor 3m painting tape and angle the water away from the tape to sandblast panels or entire vehicles. The strength of the pressure washer used makes a huge difference in how well it works. The bigger the compressor, the more sand it can pull at a time, and the harder it's going to hit the surface when sprayed. I don't think I would want to bother with this tool if my pressure washer was any smaller. I've owned and used a few of these over the years and this one is better quality than the other brands I've tried. I have yet to have a single nozzle clog. 10/10
Over all I like this. Dry sand blasting is hazardous to your health unless you wear a respirator. Doing it with water to control the dust is how most professionals do it. The parts are good quality. Not that it's very hard to figure out. But it did come with a ebook full of information like how much water vs sand in the bucket is optimal vs trial and error method. I think beach sand would work well if sifted with this but the beaches around here are frozen solid so it'll have to wait for a few months. I used my 1500 psi pressure washer to see how well it would do. It worked. I think the larger gas powered one would do a much better job but that's put up until spring. The safety glasses work but a full face shield is a much better way to go. Unlike sand blasting the water seems to deflect back towards you easier. Kind of like how spraying a hose while washing a car will sometimes squirt back at you. I was easily able to remove light to medium rust from a receiver hitch. I think heavy scale could be done. I'm looking forward to this spring so I can try it out on a steel arm assembly that has a tube that slides inside another. It's rusted enough so they no longer slide and it's welded so they can't come apart. I think this will get the grit in between the metal so I can free them up. Read less
sandblaster unit works great, but for me here's couple of key importance's when using blasting unit--good blasting material, use 2-persons when operation pressure machine/blaster to save time/material, and order extra sandblast nozzle kits.
Looks great but I haven’t tried it yet
Pro Sandblast Kit™ Ceramic Series 60% OFF Limited Time Offer
It works great and it’s a lot cleaner to use. No dust and I don’t have to wear a hood and coveralls.
Pro Sandblast Kit™ Ceramic Series 60% OFF Limited Time Offer
Amazing
Pro Sandblast Kit™ Ceramic Series 60% OFF Limited Time Offer
Took a while to get here but it works really well. Sends sand literally everywhere but I guess that’s the nature of the tool!
Pro Sandblast Kit™ Ceramic Series 60% OFF Limited Time Offer
product looks like good quality material. Have not had a chance to use it yet. I will share photos of the product in action on my 65 Corvette frame and components.
Hose had a kink in it . Hose needs to be a few feet longer. I like how it works though.
Cheaply made 10% removal with 4400 psi pressure washer. Was too hopeful. Email communication is horrible but the spam keeps coming. Asked for a refund 4 times then finally went through my credit card. Definitely not as advertised.
Great
This works great on my 4500psi pressure washer using just sand pit sand from hardware , but I'm keen to try it with different blast material to see the difference in finishes , but happy so far.
Great
Works good
When I received it the face mask was cracked. No instructions. No hose clamps for sand siphon hose. As far as performance, it was mediocre at best. I consider it a waste of money!
It works great, I will for sure use this a lot. It moves some sand, and it removes material really well. The reason for the low rating is that I did not get all that was promised. The rust inhibitor did not show up, and it said face shield, but all that I got was a pair of safety glasses. Other than those two things, it seems like it will be a good product.
Haven't used it yet but looks like it will work just fine
Wouldnt pull the media evenly, a huge letdown. It just surged in mass amounts of media and wasnt consistent. It didnt mix the media in well at all.
Your Project
Pick your project type below
Truck Frames
Remove rust from chassis and suspension parts.
Trailers
Strip rust and old paint from utility or boat trailers.
Farm Equipment
Restore tractors and steel tools.
Automotive Parts
Clean rims, brackets, and body panels.
Metal Structures
Restore gates, fences, and railings.
Grinding takes forever. Wire wheels wear out fast. And real sandblasting setups cost thousands. That’s why most people quit before the job is done.
SandblastKit solves that by turning your pressure washer into a powerful wet sandblaster.
Problem 1
Grinding Is Slow
You spend hours on one spot… and still miss rust in corners and edges.
Problem 2
Wheels Wear Out
You burn through discs and wire wheels without real progress.
Problem 3
Blasting Costs Thousands
Compressors, cabinets, setups… most people never even start.
The System
Most attachments only blast. This system helps you remove, stop, and prevent rust — the right way.
Turn your pressure washer into a wet sandblaster and strip rust, paint & scale fast — no compressor needed.
Neutralize hidden rust and prep the surface for coating — so it doesn’t come back.
Seal the metal properly so your restoration actually lasts. Ready for prime and paint
Add Media
Place blasting sand or crushed glass in a bucket.
Blast Rust
Your pressure washer powers the blasting stream.
Rinse Surface
Wash away blasting residue.
Apply Rust Inhibitor
Stops flash rust on bare metal.
Seal Metal
Prime or coat for long-term protection.
The PRO SandBlastKit transforms any pressure washer into a professional wet sandblaster in seconds. Quick-connect, adjust your flow, and tackle anything from rust removal to paint stripping. One kit, endless projects.
For light jobs, small projects, first-time users
Restores cutting power, Prevents downtime
For light jobs, small projects, first-time users
Extra ceramic nozzles for extended use
Protective face covering for safety
Remove rocks and debris before blasting
Keeps Abrasive Grit, Rebound and dust off your skin and clothes
High impact protective gloves
Adds Pressure to your pressure washer
For light jobs, small projects, first-time users
Even more extra ceramic nozzles for extended use
Protective face covering for safety
Remove rocks and debris before blasting
Boost PSI for aggressive rust removal
Prevents oxidation
Black Diamond is a high-performance coal slag abrasive designed for fast, aggressive material removal.
Full coverage protection for wet blasting sessions
| Starter / Core Kit | Do It Right | Pro / Heavy-Duty | |
|---|---|---|---|
| Pro SANDBLASTKIT™ Base attachment with ceramic nozzle | |||
| SBK Pro Ceramic Nozzles Replacement ceramic nozzles | |||
| Sandblastkit Facemask Protective face covering for safety | |||
| Sandblastkit Sand Sifter / Filter Remove rocks and debris before blasting | |||
| SandblastKit Pressure Booster Gun Boost PSI for aggressive rust removal | |||
| Sandblastkit Rust Inhibitor - 1 Gallon Prevents oxidation | |||
| Sand Black Diamonds 40 LBS Black Diamond is a high-performance coal slag abrasive designed for fast, aggressive material removal. | |||
| SandblastKit Pro Full-Body Blasting Suit Keeps abrasive, debris, and overspray off your clothes and skin |
Thousands of builders use SandblastKit to remove rust and restore metal surfaces.
Pro Tip: The higher your water pressure, the stronger the vacuum suction. This is why gas-powered washers (2500-3500 PSI) create more aggressive blasting power than electric models.
Pro Tip: The higher your water pressure, the stronger the vacuum suction. This is why gas-powered washers (2500-3500 PSI) create more aggressive blasting power than electric models.
Gear is built with modularity in mind. Like building blocks, it's easy to build your perfect setup.
An international community of users share their ideas and journeys with each other online, anywhere.
Works great !! Before and after.. 3100psi pressure washer and Black Diamond media from Tractor Supply
I am definitely happy with the results from blasting my 78' Ford frame.
Bought one 8 months ago and finally tested it on a oil pan with a bag of play sand from home depot I set the sand bucket 3’ above the work peace and it sucked up sand like it was in a hotdog eating contest. I then warmed the pan with propane to remove any moisture and primed it all in one step. Very pleased It worked well.
I completely retract my previous statement that this company is fake. Not only is this product as real as it gets. When I had doubts about a shipping mistake that happened. A real person reached out to answer my concerns and ultimately fixed any issues. They were genuine in their apology and very humble in their approach.
This might save me thousands of dollars in my classic car restoration. Honestly I'll give this a shot.
Heres a real review. I have the 3000psi kit and the 5000psi kit I bought a metal trashcan. I placed a window screen mesh on top to screen the rock from the play sand. ****VERY IMPORTANT STEP**** this prevents frustration with clogged tips. Keep the sand feed hose feeding on top while blasting. Prevents water from getting in the line when you stop spraying. Does it work 100% After you spray it will leave a gold oxidation. To remove this before prepwork you will need to use Ospho or Chemprime. A phosphoric acid which will help etch the metal for the Direct to metal (DTM) primer to positively bond. I love this thing. Yall should send me a new kit as my nozzles just about had it... i pur it through the test with my 1972 Cutlass
I have one you better be careful all your friends will want to borrow or bring stuff to you .....it mad a believer out of me I did a rim off a 1964 f350 never cleaned. 7 minutes it was down to metal
Works great! Used sifted play sand and it stripped the paint and rust right off!
I just finished a 1969 Chevelle door jams doors so forth. Messy but effective.....start the body this week. I changed the sand feed line to a larger size because it kept stopping up with wet sans close to the nosel. Small pebbles were and issue as well. Use as fine sand as you can find. Still had to sift it .The larger sand feed line made a world of difference.
I have used a couple different variants of this. It takes a decent size pressure washer and water supply to run. Also goes through media pretty quickly. That being said it generally leaves a decent finish, also you will need to make sure you have a plan to prevent flash rust after you’re finished.
I first learned about this, from watching YouTube videos about pressure washing with a sandblast attachment, and I spent less than $300 for the pressure washer and this sandblast attachment, bought a 40lb bag of media for less than $10, and a tarp to collect & reuse the media. I blasted my own 1970 GM A-body frame on a pair of plastic sawhorses, on a car trailer, in my back yard, and there was no (harmful) dust to breathe, and no mess or cleanup to worry about. My frame came out like new, I primered & painted it with rattle cans, as a driver vehicle! Best tool I’ve ever owned!
Works really good used it today was surprise how it came out
I purchased one and it works excellent without wasting sand. Although I wished I'd ordered a wet suit with it.
These work great. Only thing I recommend is to filter the cheap sand through a screen to rid it of chunks that plug the suction tube.
This WORKS!!!! I ordered mine and i was amazed at how well it worked without the dust storm and use of a large air compressor.
I feed sand to this unit using a small pressure feed pot. Works much more efficient as the sand is forced into the hose with air pressure. The suction hose does not plug up! Still dustless blasting!!! Great combination for me!
Everything you need to know about SandBlastKit. Can't find your answer? Contact us directly.
SandBlastKit converts your existing pressure washer into a wet sandblaster. It attaches directly to your wand and uses suction to draw sand from a bucket, mixing it into the water stream so you can blast away rust, paint, and heavy coatings from metal, wood, and concrete. Most standard pressure washers (1,500–4,000 PSI) are compatible.
No special equipment required
It depends on the job. The Starter Kit is perfect for small projects and first-time users. The Do It Right Bundle (our most popular) adds PRO Nozzles, a Face Mask, Sand Sifter, and Rust Inhibitor — covering everything for a complete job. For heavy-duty work like full truck frames, trailers, or farm equipment, the Pro Bundle includes a high-pressure gun and cleanup accessories built for repeated, large-scale use. Not sure? Contact us and we'll point you in the right direction.
Setup order matters: always pull the trigger and get water flowing before placing the suction head into the sand, and when stopping, lift the suction head out first, then release the trigger. Keep the sand hose as upright as possible (around the 12 o'clock position) and raise your sand bucket about 3 feet off the ground for better suction. Using dry, filtered sand is essential, even one damp clump can block the system. This is the single most overlooked step in any pressure washer sandblaster DIY setup.
Use dry, coarse-grade blasting sand — avoid play sand or beach sand as they are too fine, too smooth, or too damp and will clog the system. Different jobs call for different media: coarser grits remove heavy rust and thick coatings, while finer grits are better for lighter prep work or softer surfaces like wood. Always run your sand through the Sand Filter/Sifter before each session to remove rocks, moisture, and debris.
After blasting, bare metal oxidises fast — sometimes within hours. The fix is simple: add Rust Inhibitor to your water feed line (1 oz per gallon). This protects the surface for up to 72 hours, giving you plenty of time to apply primer or paint. If you're not coating right away, wipe the surface dry, blow air into all seams and joints, and store in a dry environment. The Mini Cordless Turbo Jet Blower is great for clearing moisture from tight spots like bolts and frames.
Yes — with the right setup you can recover and reuse 70–80% of your sand. Place the Sandblast Catch Net under your work area to collect spent media. After blasting, rake it out, let it dry in the sun, then run it through the Sand Filter/Sifter again before the next session. Store reclaimed sand in a sealed metal container away from moisture to keep it dry and ready to use.
The two most common causes are wet sand and incorrect hose angle. Check that your sand is completely dry (sift it first), keep the suction hose upright, and make sure the bucket is raised off the ground. If suction is still poor, adjust the black knob on your washer's pump to regulate flow. For stubborn rust or thicker coatings, upgrading to the High-Pressure Washer Gun significantly boosts PSI and gives you interchangeable tips for more targeted control.
We analyzed every Facebook review so you know exactly what to expect and what questions to ask before you buy.
The friction is technical clarity, not trust.
60-70% of comments show real buying intent. They just need one clear answer before they pull the trigger.
