Carbide 600
Carbide 600
The World’s First Controlled-Flow Blasting System — Carbide 600 Setup
A patent-pending, gravity-fed air-assisted system designed to reduce clogging, control media use, and keep you blasting continuously.
Designed for continuous blasting — not stop-and-go
Controlled flow = less clogging, more consistency
Works with your pressure washer (1500–5000 PSI)
Step-by-step guide included — no guessing
Stop Slowing Down on Heavy Rust & Paint Removal
If your current setup struggles on thicker rust, stubborn coatings, or longer blasting sessions, it’s time to upgrade. The Pro Sandblast Kit™ – Carbide Upgrade (600 Bar) is built for serious wet sandblasting—delivering stronger cutting power, smoother blasting performance, and longer-lasting durability under demanding conditions.
Designed with a controlled high-output blast flow, it helps remove rust, paint, and coatings faster while maintaining more consistent blasting performance from start to finish.
Why Choose Carbide Nozzle 600 Bar?
- 600 Bar Rated – Built for high-pressure wet sandblasting systems and demanding restoration work
- Faster Rust & Paint Removal – Stronger surface impact helps remove coatings with fewer passes
- Carbide Durability – Designed to withstand abrasive media like crushed glass, garnet, and slag
- Consistent Blasting Performance – Helps reduce pressure drop-off during extended blasting sessions
- Controlled Blast Flow – Maintains smoother media delivery for more even blasting results
- Heavy-Duty Build – Ideal for frames, trailers, equipment, and heavy rust removal jobs
- No Compressor Required – Runs directly from your pressure washer wet sandblasting setup
- Less Downtime – Fewer nozzle replacements and more time getting work done
Specifications
- Material: Tungsten Carbide
- Pressure Rating: Up to 600 Bar
- Recommended PSI Range: 1500–5000 PSI pressure washers
- Application: Wet sandblasting
- Blast Performance: Controlled-flow blasting output for heavy rust, paint, and coating removal
- System Compatibility: SandBlastKit Pro Sandblast Kit™ systems
- Media Compatibility: Dry abrasive media such as crushed glass, garnet, and slag
- Nozzle Behavior: Designed for stronger cutting power and more consistent blasting during long sessions
- Use Case: Rust removal, paint stripping, coating removal, and surface preparation
- System Requirement: No air compressor required
What’s in the Box?
- 1x Carbide Nozzle 600 Bar
Carbide 600
Choose Your System
Seal Pick Setup
Traditional direct-feed blasting setup
PVC Gravity-Fed System
Controlled-flow setup designed for smoother media delivery
Choose the setup that fits your blasting style.
Choose Your Nozzles
Ceramic
Light jobs + general use
Carbide 500
Most PopularLonger blasting sessions
Carbide 600
Heavy rust + tougher work
Fan Nozzle
Best For Large AreasWider coverage + faster blasting
Your Setup
Join the community
An international community of users share their ideas and journeys with each other online, anywhere.
Works great !! Before and after.. 3100psi pressure washer and Black Diamond media from Tractor Supply
I am definitely happy with the results from blasting my 78' Ford frame.
Bought one 8 months ago and finally tested it on a oil pan with a bag of play sand from home depot I set the sand bucket 3’ above the work peace and it sucked up sand like it was in a hotdog eating contest. I then warmed the pan with propane to remove any moisture and primed it all in one step. Very pleased It worked well.
I completely retract my previous statement that this company is fake. Not only is this product as real as it gets. When I had doubts about a shipping mistake that happened. A real person reached out to answer my concerns and ultimately fixed any issues. They were genuine in their apology and very humble in their approach.
This might save me thousands of dollars in my classic car restoration. Honestly I'll give this a shot.
Heres a real review. I have the 3000psi kit and the 5000psi kit I bought a metal trashcan. I placed a window screen mesh on top to screen the rock from the play sand. ****VERY IMPORTANT STEP**** this prevents frustration with clogged tips. Keep the sand feed hose feeding on top while blasting. Prevents water from getting in the line when you stop spraying. Does it work 100% After you spray it will leave a gold oxidation. To remove this before prepwork you will need to use Ospho or Chemprime. A phosphoric acid which will help etch the metal for the Direct to metal (DTM) primer to positively bond. I love this thing. Yall should send me a new kit as my nozzles just about had it... i pur it through the test with my 1972 Cutlass
I have one you better be careful all your friends will want to borrow or bring stuff to you .....it mad a believer out of me I did a rim off a 1964 f350 never cleaned. 7 minutes it was down to metal
Works great! Used sifted play sand and it stripped the paint and rust right off!
I just finished a 1969 Chevelle door jams doors so forth. Messy but effective.....start the body this week. I changed the sand feed line to a larger size because it kept stopping up with wet sans close to the nosel. Small pebbles were and issue as well. Use as fine sand as you can find. Still had to sift it .The larger sand feed line made a world of difference.
I have used a couple different variants of this. It takes a decent size pressure washer and water supply to run. Also goes through media pretty quickly. That being said it generally leaves a decent finish, also you will need to make sure you have a plan to prevent flash rust after you’re finished.
I first learned about this, from watching YouTube videos about pressure washing with a sandblast attachment, and I spent less than $300 for the pressure washer and this sandblast attachment, bought a 40lb bag of media for less than $10, and a tarp to collect & reuse the media. I blasted my own 1970 GM A-body frame on a pair of plastic sawhorses, on a car trailer, in my back yard, and there was no (harmful) dust to breathe, and no mess or cleanup to worry about. My frame came out like new, I primered & painted it with rattle cans, as a driver vehicle! Best tool I’ve ever owned!
Works really good used it today was surprise how it came out
I purchased one and it works excellent without wasting sand. Although I wished I'd ordered a wet suit with it.
These work great. Only thing I recommend is to filter the cheap sand through a screen to rid it of chunks that plug the suction tube.
This WORKS!!!! I ordered mine and i was amazed at how well it worked without the dust storm and use of a large air compressor.
I feed sand to this unit using a small pressure feed pot. Works much more efficient as the sand is forced into the hose with air pressure. The suction hose does not plug up! Still dustless blasting!!! Great combination for me!
Frequently Asked Questions
Everything you need to know about SandBlastKit. Can't find your answer? Contact us directly.
What does SandBlastKit actually do, is it a real water sandblaster or just an attachment?
SandBlastKit converts your existing pressure washer into a wet sandblaster. It attaches directly to your wand and uses suction to draw sand from a bucket, mixing it into the water stream so you can blast away rust, paint, and heavy coatings from metal, wood, and concrete. Most standard pressure washers (1,500–4,000 PSI) are compatible.
No special equipment required
Which bundle do I need for my project?
It depends on the job. The Starter Kit is perfect for small projects and first-time users. The Do It Right Bundle (our most popular) adds PRO Nozzles, a Face Mask, Sand Sifter, and Rust Inhibitor — covering everything for a complete job. For heavy-duty work like full truck frames, trailers, or farm equipment, the Pro Bundle includes a high-pressure gun and cleanup accessories built for repeated, large-scale use. Not sure? Contact us and we'll point you in the right direction.
How do I set up my DIY pressure washer sandblaster correctly to avoid clogging?
Setup order matters: always pull the trigger and get water flowing before placing the suction head into the sand, and when stopping, lift the suction head out first, then release the trigger. Keep the sand hose as upright as possible (around the 12 o'clock position) and raise your sand bucket about 3 feet off the ground for better suction. Using dry, filtered sand is essential, even one damp clump can block the system. This is the single most overlooked step in any pressure washer sandblaster DIY setup.
What type of sand or blasting media should I use?
Use dry, coarse-grade blasting sand — avoid play sand or beach sand as they are too fine, too smooth, or too damp and will clog the system. Different jobs call for different media: coarser grits remove heavy rust and thick coatings, while finer grits are better for lighter prep work or softer surfaces like wood. Always run your sand through the Sand Filter/Sifter before each session to remove rocks, moisture, and debris.
How do I prevent rust from coming back right after blasting?
After blasting, bare metal oxidises fast — sometimes within hours. The fix is simple: add Rust Inhibitor to your water feed line (1 oz per gallon). This protects the surface for up to 72 hours, giving you plenty of time to apply primer or paint. If you're not coating right away, wipe the surface dry, blow air into all seams and joints, and store in a dry environment. The Mini Cordless Turbo Jet Blower is great for clearing moisture from tight spots like bolts and frames.
Can I reuse my blasting sand to save money?
Yes — with the right setup you can recover and reuse 70–80% of your sand. Place the Sandblast Catch Net under your work area to collect spent media. After blasting, rake it out, let it dry in the sun, then run it through the Sand Filter/Sifter again before the next session. Store reclaimed sand in a sealed metal container away from moisture to keep it dry and ready to use.
My blasting feels weak or the sand keeps clogging, what should I do?
The two most common causes are wet sand and incorrect hose angle. Check that your sand is completely dry (sift it first), keep the suction hose upright, and make sure the bucket is raised off the ground. If suction is still poor, adjust the black knob on your washer's pump to regulate flow. For stubborn rust or thicker coatings, upgrading to the High-Pressure Washer Gun significantly boosts PSI and gives you interchangeable tips for more targeted control.
What 100+ real buyers told us
We analyzed every Facebook review so you know exactly what to expect -- and what questions to ask before you buy.
The friction is technical clarity -- not trust.
60-70% of comments show real buying intent. They just need one clear answer before they pull the trigger.