Carbide 600 Pro Blasting Bundle

The Complete Wet Sandblasting and Surface Prep System

Everything you need to prepare the media, strip the surface, and protect the bare metal afterward — combined in one complete package.

The SandBlastKit Pro™ Complete Blasting & Surface Prep Bundle pairs the PVC Gravity-Fed Delivery System with both the Carbide 600 and Ceramic Series sandblasting kits. You also get a stainless-steel Sand Sifter to help prevent clogs and a full gallon of Rust Inhibitor to protect freshly blasted metal.

Use the Carbide 600 for heavy rust, stubborn paint, thick coatings, frames, trailers, and long blasting sessions. Switch to the Ceramic Series when you need a tighter stream and more control around corners, seams, smaller parts, and detailed areas.

The included PVC Gravity-Fed Delivery System holds up to 150 lbs of abrasive media. Gravity moves the media downward naturally while the patent-pending metering sleeve valve and precision air assist maintain a smooth, controlled feed. That means less sputtering, fewer dry patches, and no stopping to shake a bucket.

Before blasting, run your dry abrasive media through the included stainless-steel Sand Sifter to remove oversized particles, stones, and debris that can block the hose or nozzle. Once the surface is stripped, apply the included Rust Inhibitor to help prevent flash rust and keep bare metal protected until it is ready for primer or paint.

No air compressor or blasting cabinet required. Connect it to a compatible pressure washer and handle the entire process with one system — sift, feed, blast, and protect.

Why Choose the Complete Blasting & Surface Prep Bundle?

Two Blasting Systems for Different Jobs

Carbide 600 — Heavy Rust and Stubborn Coatings

The Carbide 600 is built for jobs where removal speed, coverage, and durability matter. Its wider mixing chamber creates a stronger vacuum pull, while the larger carbide bore produces a wider blast radius than standard ceramic tips.

Use it for:

• Heavy rust and corrosion
• Thick or stubborn paint
• Frames and chassis
• Trailers and farm equipment
• Large metal structures
• Long, sustained blasting sessions

Ceramic Series — Controlled and Detailed Blasting

The Ceramic Series gives you a tighter blasting stream for smaller surfaces and areas that require greater control. It is a practical choice for lighter surface preparation, detailed components, corners, seams, and narrow working areas.

Use it for:

• Smaller automotive parts
• Corners, edges, and seams
• Detailed rust removal
• Light-to-moderate paint stripping
• Metal, concrete, brick, and suitable wood surfaces

From Abrasive Media to Protected Bare Metal

1. Sift the Media

Pour your dry abrasive media through the stainless-steel Sand Sifter before loading the gravity-fed bag. The mesh removes rocks, oversized particles, and debris that could block the hose or nozzle.

2. Load the Gravity-Fed Bag

Fill the PVC bag with properly dried and sifted blasting media. The bag holds up to 150 lbs, allowing you to work longer without constantly stopping to refill.

3. Select Your Blasting System

Choose the Carbide 600 for aggressive removal and wider coverage, or use the Ceramic Series when the project calls for a tighter, more controlled stream.

4. Adjust the Media Flow

Use the patent-pending metering sleeve valve to dial in the correct amount of abrasive media. The precision air assist helps maintain steady movement through the 14 ft upgraded media hose.

5. Protect the Bare Metal

After blasting, apply the Rust Inhibitor by spray, wipe, or brush. It helps prevent flash rust on bare steel and iron and extends the available working time before priming or painting.

Specifications

What’s in the Box?

• 1× Gravity-Fed Bag System
• 1× Carbide 600 Bar Sandblasting System
• 1× Ceramic Series Sandblasting System
• 1× Rust Inhibitor — 1 Gallon
• 1× Stainless-Steel Sand Sifter
• 1× Quick-Connect Adapter
• 1× PVC Gravity-Fed Media Bag
• 1× Patent-Pending Metering Sleeve Valve
• 1× Precision Air Assist Assembly
• 1× 14 ft Upgraded Gravity-Fed Media Hose