•
1 10

SandBlastKit Complete Protection Kit

SandBlastKit Complete Protection Kit

$102.00$146.00Save $44.00
Shipping calculated at checkout.

Complete your kitTap to add
  • Shop Pay
  • Mastercard
  • PayPal
  • Visa
  • Apple Pay
  • American Express
  • +7Google Pay BancontactBizumDiners ClubDiscoveriDEAL WeroSatispay

About this product

Read full descriptionShow less

The Complete Protection Bundle โ€” Gloves, Mask, and Apron in One Kit

If you're gearing up for a wet sandblasting job and buying your protective gear piece by piece โ€” stop. The SandBlastKit Proโ„ข Protective Gear Bundle is the complete three-in-one safety kit: ImpactGrip Protective Gloves, the Full-Face Sandblasting Respirator, and the Protective Blasting Apron โ€” everything you need to cover your hands, face, and body before you pull the trigger.

Built for the same job, sold as one kit. Sandblasting slurry doesn't pick and choose where it lands โ€” it hits your hands, your face, and your chest all at once. This bundle covers all three in a single order, at a lower combined price than buying each piece separately.

The ImpactGrip Gloves keep your hands protected and your grip steady through long sessions of rebound and abrasive spray. The Full-Face Respirator seals out dust, grit, and debris with a replaceable filter and an anti-fog visor so you can see clearly and breathe clean from first trigger pull to last. The Blasting Apron sheds slurry off its smooth coated face instead of soaking it in, so sand and water run down and drop to the ground โ€” not into your shirt, your waistband, or your boots. No guesswork. Gear up once, and get to work.

Why Choose the Protective Gear Bundle?

โœ“ Three-in-One Complete Kit โ€” Gloves, full-face respirator, and blasting apron together in one order. Nothing else to buy โ€” gear up and start blasting.
โœ“ ImpactGrip Protective Gloves โ€” Built to hold up against abrasive rebound and spray while keeping a secure, steady grip on the wand through long sessions.
โœ“ Full-Face Coverage, Clean Airflow โ€” Replaceable particulate filters block fine dust and debris while keeping breathing comfortable during long jobs.
โœ“ Anti-Fog Visor โ€” Stays clear through intense, extended use, so you're not stopping mid-job to wipe down and can keep working with full visibility.
โœ“ Slurry-Shedding Apron โ€” Smooth coated face has no exposed weave for abrasive to bury into. Sand and water run down and drop to the ground instead of soaking into your clothes.
โœ“ Wipes Clean, Ready to Reuse โ€” The apron wipes clean in seconds and hangs to dry, ready for the next job instead of staying stiff, stained, and gritty.
โœ“ Adjustable, Secure Fit โ€” Straps on the respirator adjust for a stable seal that holds through movement, whether you're in the shop or out in the field.
โœ“ Built for Real Blasting Jobs โ€” Rust removal, paint stripping, coating removal, parts washing, degreasing, and general workshop cleanup where spray and grit fly back at you.
โœ“ Protects the Gear You Already Own โ€” One ruined pair of jeans or one soaked hoodie can cost more than this whole bundle. Gear up once instead of writing off clothes job after job.
โœ“ Bundle Savings โ€” All three pieces cost less together than buying each one separately, with the same protection you'd assemble piece by piece anyway.

Specifications

Product Type Complete Protective Gear Bundle (Gloves + Full-Face Respirator + Blasting Apron)
Gloves ImpactGrip Protective Gloves โ€” built for grip and rebound protection during blasting
Respirator Full-Face Sandblasting Respirator with replaceable particulate filters and anti-fog visor
Apron Surface Smooth coated face designed to shed slurry and abrasive rather than absorb it
Apron Coverage Front torso and upper-leg protection
Fit Adjustment Adjustable straps on the respirator for a secure, all-day fit
Cleaning Apron wipes or rinses clean after use and hangs to dry; respirator filters are replaceable
Primary Application Wet sandblasting and pressure washing
Additional Uses Parts washing, tank servicing, degreasing, mixing, and general workshop work
Reusable Yes โ€” all three pieces are built for repeated use across jobs
Recommended Setup Wear all three together with rubber boots and safety eyewear for full coverage

Full Protection, Head to Hands

Sandblasting rebound doesn't care what part of you it hits. This bundle covers the parts that take the most abuse on every job โ€” your hands on the wand, your face in the spray path, and your chest and legs catching what bounces back.

Wear all three together and blast for an hour. When you stop, there's no wet grit soaked into your gloves, no dust in your lungs, and no heavy layer of slurry clinging to your clothes.

Covers hands, face, and torso ยท Wipes and rinses clean ยท Ready for the next job

This bundle includes the ImpactGrip Gloves, Full-Face Respirator, and Blasting Apron. Rubber boots are not included.

WHY IT MATTERS

Skipping any one piece of protection is how people end up with ruined clothes, sore hands, or a lungful of dust they didn't need to breathe. Gearing up properly takes seconds and saves you from all three.

  • Covers the whole job โ€” hands, face, and body in one order
  • Built for wet blasting โ€” designed around the spray and rebound this work throws back at you
  • Reusable, not disposable โ€” clean it, hang it, wear it again
  • Costs less together โ€” bundle pricing beats buying each piece on its own

BUNDLE SPECS

Includes ImpactGrip Protective Gloves ยท Full-Face Sandblasting Respirator ยท Protective Blasting Apron
Coverage Hands, face, front torso, and upper legs
Best For Wet sandblasting, pressure washing, and general workshop protection
Included as Part of this complete Protective Gear Bundle

BUNDLE FAQ

Does this bundle include all three items?
Yes. This package includes the ImpactGrip Protective Gloves, the Full-Face Sandblasting Respirator, and the Protective Blasting Apron.

Do I still need anything else for full protection?
Rubber boots and safety eyewear are recommended alongside this bundle for a complete setup, but are not included.

Can I use this gear for more than sandblasting?
Yes. The apron and gloves also work well for pressure washing, parts washing, degreasing, and general workshop cleanup.

Are these items reusable?
Yes. The apron wipes clean and hangs to dry, the gloves are built for repeated use, and the respirator's filters are replaceable so the mask itself stays in service.

What's in the Box?

  • 1ร— SandblastKitโ„ข ImpactGrip Protective Gloves
  • 1ร— Full-Face Sandblasting Respirator
  • 1ร— Protective Blasting Apron

Included free with your kit

  • FREEExtra ceramic nozzle
  • FREESafety glasses
  • FREEQuick-start video guide
  • Fits any pressure washer
  • Free US shipping
  • 30-day guarantee
View full details

Pairs well with

Owners usually grab these with it.

Join the community

An international community of users share their ideas and journeys with each other online, anywhere.

Visit our community

2,400+ followers

  • Jay Evans

    29 weeks ago

    Works great !! Before and after.. 3100psi pressure washer and Black Diamond media from Tractor Supply

    fb post before after

  • Shane Larson

    2 weeks ago

    I am definitely happy with the results from blasting my 78' Ford frame.

    fb post ford frame

  • Rick Young

    23 weeks ago

    Bought one 8 months ago and finally tested it on a oil pan with a bag of play sand from home depot

    I set the sand bucket 3โ€™ above the work peace and it sucked up sand like it was in a hotdog eating contest. I then warmed the pan with propane to remove any moisture and primed it all in one step. Very pleased It worked well.

    fb post oil pan
    5

  • Gilberto Lupian

    1 year ago

    I completely retract my previous statement that this company is fake. Not only is this product as real as it gets. When I had doubts about a shipping mistake that happened. A real person reached out to answer my concerns and ultimately fixed any issues. They were genuine in their apology and very humble in their approach.

  • Anthony Megown

    21 weeks ago

    This might save me thousands of dollars in my classic car restoration. Honestly I'll give this a shot.

  • Derel Bertrand

    4 days ago

    Heres a real review.
    I have the 3000psi kit and the 5000psi kit

    I bought a metal trashcan.
    I placed a window screen mesh on top to screen the rock from the play sand.
    ****VERY IMPORTANT STEP****
    this prevents frustration with clogged tips.

    Keep the sand feed hose feeding on top while blasting. Prevents water from getting in the line when you stop spraying.
    Does it work 100%

    After you spray it will leave a gold oxidation.

    To remove this before prepwork you will need to use Ospho or Chemprime. A phosphoric acid which will help etch the metal for the Direct to metal (DTM) primer to positively bond.

    I love this thing.
    Yall should send me a new kit as my nozzles just about had it... i pur it through the test with my 1972 Cutlass

  • Tommy Greene

    22 weeks ago

    I have one you better be careful all your friends will want to borrow or bring stuff to you .....it mad a believer out of me I did a rim off a 1964 f350 never cleaned. 7 minutes it was down to metal

  • Cecelia Meinholdt

    24 weeks ago

    Works great! Used sifted play sand and it stripped the paint and rust right off!

    46

  • Scott Stewart

    22 weeks ago

    I just finished a 1969 Chevelle door jams doors so forth. Messy but effective.....start the body this week. I changed the sand feed line to a larger size because it kept stopping up with wet sans close to the nosel. Small pebbles were and issue as well. Use as fine sand as you can find. Still had to sift it .The larger sand feed line made a world of difference.

    3

  • Ben Mowery

    31 weeks ago

    I have used a couple different variants of this. It takes a decent size pressure washer and water supply to run. Also goes through media pretty quickly. That being said it generally leaves a decent finish, also you will need to make sure you have a plan to prevent flash rust after youโ€™re finished.

    11

  • Scott White

    31 weeks ago

    I first learned about this, from watching YouTube videos about pressure washing with a sandblast attachment, and I spent less than $300 for the pressure washer and this sandblast attachment, bought a 40lb bag of media for less than $10, and a tarp to collect & reuse the media.

    I blasted my own 1970 GM A-body frame on a pair of plastic sawhorses, on a car trailer, in my back yard, and there was no (harmful) dust to breathe, and no mess or cleanup to worry about.

    My frame came out like new, I primered & painted it with rattle cans, as a driver vehicle!

    Best tool Iโ€™ve ever owned!

    18

  • Julian Harris

    9 weeks ago

    Works really good used it today was surprise how it came out

    8

  • Darrell Lemaster

    32 weeks ago

    I purchased one and it works excellent without wasting sand. Although I wished I'd ordered a wet suit with it.

    7

  • Scott Barr

    25 weeks ago

    These work great. Only thing I recommend is to filter the cheap sand through a screen to rid it of chunks that plug the suction tube.

    21

  • BrettAllison Lewis

    12 weeks ago

    This WORKS!!!! I ordered mine and i was amazed at how well it worked without the dust storm and use of a large air compressor.

    91

  • Robert SAlain Levy

    21 weeks ago

    I feed sand to this unit using a small pressure feed pot. Works much more efficient as the sand is forced into the hose with air pressure. The suction hose does not plug up! Still dustless blasting!!! Great combination for me!

    33

Owner reviews

No reviews for SandBlastKit Complete Protection Kit yet. Bought one? Tell other owners how the job went.

โ€“ Be the first

Asked on every call. Answered here.

Straight answers to what everyone wants to know before their first blast.

Question 01

Which pressure washer do I need?

The one you already have, gas or electric. Flow (GPM) matters as much as pressure: a washer with good flow often blasts better than a higher-PSI one with weak flow.

  • Sweet spot: 2,500โ€“3,000 PSI for regular blasting, 3,000+ PSI with good GPM for heavy rust.
  • Ceramic Series: built for washers up to about 5,000 PSI.
  • Carbide 600: tungsten carbide nozzle rated to 600 bar, for the biggest machines and longest jobs.

Question 02

Which media should I use?

Dry, coarse media only.

  • Black Diamonds: aggressive and fast. Heavy rust, thick paint, frames, trailers.
  • Crushed Glass: more control and a smoother finish. Lighter rust and panels.

Never use play sand. It's too fine, holds moisture and is the fastest way to clog the line.

Question 03

How long does the nozzle last?

Ceramic nozzles are wear parts. How long they last depends on your media and pressure, which is why the Ceramic Series ships with 2 spares. The Carbide 600 nozzle is solid tungsten carbide and lasts many times longer, so it's the one for full shells, frames and repeat jobs.

Signs it's time for a new nozzle: the pattern gets wider, cutting slows down and you burn through more media.

Question 04

What aftercare do I need? (Rust inhibitor)

Bare metal flash-rusts within hours once it's wet. Two steps stop it:

  1. Add Rust Inhibitor to your blast water at 1 oz per gallon, so the surface stays clean while you work.
  2. Once it's dry, apply AP1 Conversion Coating to lock the metal down before primer.

Question 05

How do I avoid clogs?

  • Starting: water on first, then open the media.
  • Stopping: media off first, then water off.
  • Use dry, sifted media. Damp clumps and pebbles cause almost every clog.

The gravity-fed bag and tank systems feed media steadily, so they don't clog the way a suction bucket can.

01Which pressure washer do I need?

The one you already have, gas or electric. Flow (GPM) matters as much as pressure: a washer with good flow often blasts better than a higher-PSI one with weak flow.

  • Sweet spot: 2,500โ€“3,000 PSI for regular blasting, 3,000+ PSI with good GPM for heavy rust.
  • Ceramic Series: built for washers up to about 5,000 PSI.
  • Carbide 600: tungsten carbide nozzle rated to 600 bar, for the biggest machines and longest jobs.
02Which media should I use?

Dry, coarse media only.

  • Black Diamonds: aggressive and fast. Heavy rust, thick paint, frames, trailers.
  • Crushed Glass: more control and a smoother finish. Lighter rust and panels.

Never use play sand. It's too fine, holds moisture and is the fastest way to clog the line.

03How long does the nozzle last?

Ceramic nozzles are wear parts. How long they last depends on your media and pressure, which is why the Ceramic Series ships with 2 spares. The Carbide 600 nozzle is solid tungsten carbide and lasts many times longer, so it's the one for full shells, frames and repeat jobs.

Signs it's time for a new nozzle: the pattern gets wider, cutting slows down and you burn through more media.

04What aftercare do I need? (Rust inhibitor)

Bare metal flash-rusts within hours once it's wet. Two steps stop it:

  1. Add Rust Inhibitor to your blast water at 1 oz per gallon, so the surface stays clean while you work.
  2. Once it's dry, apply AP1 Conversion Coating to lock the metal down before primer.
05How do I avoid clogs?
  • Starting: water on first, then open the media.
  • Stopping: media off first, then water off.
  • Use dry, sifted media. Damp clumps and pebbles cause almost every clog.

The gravity-fed bag and tank systems feed media steadily, so they don't clog the way a suction bucket can.

Not sure which setup? Call us.

Tell us your pressure washer and your project. We'll tell you exactly which setup and media to get, and what you don't need.

Lines openMonโ€“Fri ยท 9amโ€“6pm EST

Questions? Call us

(819) 410-4210
Call nowText us
Compare the systems