Grease Monkey™ Nanner Peel Chemical Stripper 1 Gallon | Non-Toxic Aluminum Paint Stripper

Works great !! Before and after.. 3100psi pressure washer and Black Diamond media from Tractor Supply

I am definitely happy with the results from blasting my 78' Ford frame.

Bought one 8 months ago and finally tested it on a oil pan with a bag of play sand from home depot

I set the sand bucket 3’ above the work peace and it sucked up sand like it was in a hotdog eating contest. I then warmed the pan with propane to remove any moisture and primed it all in one step. Very pleased It worked well.

I completely retract my previous statement that this company is fake. Not only is this product as real as it gets. When I had doubts about a shipping mistake that happened. A real person reached out to answer my concerns and ultimately fixed any issues. They were genuine in their apology and very humble in their approach.

This might save me thousands of dollars in my classic car restoration. Honestly I'll give this a shot.

Heres a real review.
I have the 3000psi kit and the 5000psi kit

I bought a metal trashcan.
I placed a window screen mesh on top to screen the rock from the play sand.
****VERY IMPORTANT STEP****
this prevents frustration with clogged tips.

Keep the sand feed hose feeding on top while blasting. Prevents water from getting in the line when you stop spraying.
Does it work 100%

After you spray it will leave a gold oxidation.

To remove this before prepwork you will need to use Ospho or Chemprime. A phosphoric acid which will help etch the metal for the Direct to metal (DTM) primer to positively bond.

I love this thing.
Yall should send me a new kit as my nozzles just about had it... i pur it through the test with my 1972 Cutlass

I have one you better be careful all your friends will want to borrow or bring stuff to you .....it mad a believer out of me I did a rim off a 1964 f350 never cleaned. 7 minutes it was down to metal

Works great! Used sifted play sand and it stripped the paint and rust right off!

I just finished a 1969 Chevelle door jams doors so forth. Messy but effective.....start the body this week. I changed the sand feed line to a larger size because it kept stopping up with wet sans close to the nosel. Small pebbles were and issue as well. Use as fine sand as you can find. Still had to sift it .The larger sand feed line made a world of difference.

I have used a couple different variants of this. It takes a decent size pressure washer and water supply to run. Also goes through media pretty quickly. That being said it generally leaves a decent finish, also you will need to make sure you have a plan to prevent flash rust after you’re finished.

I first learned about this, from watching YouTube videos about pressure washing with a sandblast attachment, and I spent less than $300 for the pressure washer and this sandblast attachment, bought a 40lb bag of media for less than $10, and a tarp to collect & reuse the media.

I blasted my own 1970 GM A-body frame on a pair of plastic sawhorses, on a car trailer, in my back yard, and there was no (harmful) dust to breathe, and no mess or cleanup to worry about.

My frame came out like new, I primered & painted it with rattle cans, as a driver vehicle!

Best tool I’ve ever owned!

Works really good used it today was surprise how it came out

I purchased one and it works excellent without wasting sand. Although I wished I'd ordered a wet suit with it.

These work great. Only thing I recommend is to filter the cheap sand through a screen to rid it of chunks that plug the suction tube.

This WORKS!!!! I ordered mine and i was amazed at how well it worked without the dust storm and use of a large air compressor.

I feed sand to this unit using a small pressure feed pot. Works much more efficient as the sand is forced into the hose with air pressure. The suction hose does not plug up! Still dustless blasting!!! Great combination for me!